Rosco Metallix Metallic Paint Test Kit
Backorder: Available in 5 days (05/11/2025) if ordered today
£60.00 inc VAT
Free Saver Delivery on this item!
Rosco Metallic Paint Sample Kit
Rosco Metallix paints are a range of water based acrylic paints that are formulated with mica powder to produce a vibrant metallic finish.
This Rosco Metallix test kit contains a small pot of each of the six colours within this range of metallic paints. These Rosco Metallixs are a range of water-based, acrylic metallic paints that have been formulated with mica powder. The use of mica powder within this product offers unique reflective properties that enhance the metallic sheen without the use of metal flakes and creates a shimmer with depth and dimension. This range of paints can be applied to surfaces via a brush, roller, or spray to any appropriately primed surface and makes the perfect additions for use on stage, as part of a set design, or for use in film & TV.
Rosco Metallix Range
This sample kit contains one of each of the paints included in the metallix range, these colours are:
Specifications of the Rosco Metallix Paints
- Finish: Satin/Reflective
- Solvent: Water
- Binder Type: Vinyl Acrylic
Recommended Dilution Ratio: If the Metallix paint needs to be let down, add up to 4oz of water per quart or 16oz of water per gallon.
Surface Preparation:
Metallix paint should be applied to surfaces that have been primed with an appropriate, high-quality, water base primer that has fully dried. Establishing a base color for the primer similar to the chosen Metallix color will result in better coverage and reflectivity.
Application:
Stir well before use. Apply in thin, even, uniform coats, using a high-quality brush, roller, or by spraying*. Do not apply when surface or air temperatures are below 50°F (10°C) or above 90°F (32°C). Follow the Recommended Dilution Ratio above if thinner paint is desired. Note that over-thinning may result in loss of hide.
Spray equipment specifications:
- Use a Conventional or HLVP cup gun with both air and liquid lines from a pressure pot and compressor
- Needle/Tip: 17/100 or 1.4mm
- PSI: 40
- Do not use an airless spray system
Film Thickness: Coverage:
One US gallon of Metallix covers approximately 300 – 400 sq ft (27 – 37 sq m). Coverage varies depending on application technique, dilution, and number of layers.
Avg. Dry Time:
Roughly four hours, depending on temperature, air movement, and humidity. If a second coat is desired, allow the first coat to dry for 6-8 hours beforehand.
Clean-up:
Clean brushes, rollers, other equipment, and your skin immediately after use with soap and warm water. Close container tightly after use.
Disposal:
Dispose of contents/container to an approved waste disposal plant. Consult with local authorities for methods of disposal.
Storage:
Store in a cool/dry location at temperatures between 40°F and 90° F. Do not allow paint to freeze or be exposed to temperatures exceeding 120° F for extended periods.
Packaging:
Quart (0.946L), 1 Gallon (3.79L).
US VOC:
50 g/l
EU VOC:
12 g/l