City Theatrical DMXcat Multi-Function Test Tool

Applications

DMX Controller

• The DMX Controller app is a flexible and feature rich means for controlling 512 channels of DMX data. Two different user interfaces are included. The first emulates a conventional slider control arrangement such as is found on many simple manual lighting controllers. Touch and swipe gestures control the various level adjustments. Users can work with and easily switch between screens
  displaying 8, 64, or 512 (Live View) channels of information. For those who prefer a numeric based interface similar to what is found on a full sized lighting console, command line instructions can be input using familiar keypad and thumbwheel controls. An active 16 channel display provides current channel status. With either interface, users can adjust/work with individual, groups, or ranges of channels, record and play presets, customise names, and display levels as %, decimal, or hex values.

Fixture Controller

• The Fixture Controller app has been designed to serve as a setup and test tool for the vast selection of lighting fixtures in use today. Many of today’s moving light fixtures use over 40 channels of DMX control data, and can be configured to operate in a dozen or more modes (profiles). This can make it difficult to identify a particular channel’s function when setting up or testing a fixture with a small DMX controller. Using an extensive built in database of manufacturers, fixtures, and operational profiles, users can easily select and assign the fixture’s attributes and starting address, and a control interface specific to the fixture is displayed for testing its features. The various fixtures/personalities may be saved as “favourites” for future reference. When connected to an RDM enabled fixture, DMX cat identifies the fixture’s address and attributes and loads its control interface automatically.

DIP Switch Calculator

• The DIP Switch Calculator app is an indispensable tool used in the conversion of numeric values to their binary equivalents. Used when configuring DIP switches for setting DMX channels and other fixture parameters, users simply enter a three digit numeric value and its corresponding DIP setting is displayed. Both the numbering order and reading direction can be reversed to match the switch orientation as needed.

DMX Tester

• Connect the DMXcat to a point in a DMX data chain and view DMX information and levels. Parameters of the controller’s transmitted DMX signals may be adjusted and parameters of received DMX signals may be viewed including: Break Time, Mark After Break, Inter-slot, Mark Before Break, Number Of Slots, and Refresh Rates. A Flicker-Finder function is included for identifying intermittent problems within the data network.

RDM Controller

The RDM Controller is an application designed to control RDM enabled fixtures. Features include:

• Control & monitoring of RDM devices
• Full discovery- detects and generates a list of all RDM devices
• Detects all sub devices for a selected device
• Shows all supported parameters
• Shows descriptions for all PIDs
• GET and SET for all PIDs (even user defined)
• Monitors fixtures for any sensors with easy to view info

Light Meter (Android only)

• Useful for studio work, this app offers basic reflected light measurements to help in light level adjustment for film and video production. Light levels are displayed in LUX.

RF Spectrum Analyser (Android only)

• Identify potential communication problems before they happen. The RF Spectrum Analyser enables the user to visualise existing Wi-Fi networks operating within a venue. Each wireless network is labelled and shown graphically within an overall schematic representation of the 2.4GHz RF channel spectrum. Armed with this information, wireless DMX operation can be optimised by adjusting the type of transmission (hopping patterns) and or locating the control network in uncrowded or unused areas of the RF Spectrum.