Polyvine Interior Extreme Varnish Dead Flat
In Stock
£42.24 inc VAT
Free Saver Delivery on orders over the value of £45
Polyvine Interior Extreme Varnish (formerly Heavy Duty Extreme Varnish)
An ultra-tough, high quality, cross-linking water- based polyurethane varnish designed to provide extreme protection on interior wood, furniture, flooring, concrete, slate and flagstones. Water, stain, heat and chemical resistant, with additional high UV protection. Quick-curing in 16 hours providing an industrial level of finish.
The previous product, Heavy Duty Extreme Varnish, has now been adapted into two separate products, one for interior use and one for exterior use. They are each different products to the Heavy Duty Extreme, but each provides a specific set of improved, unique qualities designed for either interior or exterior use.
Ideal uses for the Polyvine Extreme Interior Varnish
The Polyvine extreme varnish is a very versatile product and can be used for a wide range of materials such as:
- Interior wood, wooden work surfaces, kitchen cabinets, floors and hard or softwood doors.
- Bar tops, Wooden panelling bookshelves
- Concrete
- Flagstone
- Picture frames
Key Features of the Polyvine Extreme Dead Flat Interior
- Water-based
- Interior
- Chemical resistant
- Traffic resistant
- Stain resistant
- Heat resistant
- Industrial level of finish
- Fast drying
- Cures fast
- Very hard and durable finish
- Ultra hard
- High UV Protection
- Easy to apply
- Brush or roller application
- Spray
Specifications
Preparation
- Remove all traces of old finishes, dirt, oil, wax and grease. These may have impregnated the surface and can cause failure.
- Sand in direction of the grain to provide a key.
- Thoroughly clean after sanding.
Application
- Ensure the product is well mixed but do not shake. Apply 3 coats with a synthetic varnish brush.
- On new softwood and porous surfaces, dilute the first coat 10% with water. Lightly sand wood in between applications to remove any raising of the grain.
- For a dead flat finish with high durability and stain resistance, apply 2 coats of satin followed by 1 coat of dead flat.
- To achieve full UV protection, apply 3 coats of satin before a final coat of dead flat. Instructions in the technical data sheet must be followed.
Caution
- Appearance may vary according to the colour and type of wood and the number of coats.
- Do not continuously submerge in water.
- Test for compatibility before application.
Storage
- Protect from extremes of temperature during storage and application.
Health, safety and the environment
- Non-hazardous. Ensure good ventilation.
- Keep out of reach of children.
- Contact with eyes – wash immediately with warm water.
- Remove excess from tools and mixing vessels before washing in warm soapy water.
- Do not empty excess into drains or watercourses.
Frequently Bought Together
Polyvine Exterior Extreme Varnish Dead Flat 1L
£46.46 inc VAT
Polyvine Exterior Extreme Varnish (formerly Heavy Duty Extreme Varnish)