Two-channel, 1350W, Professional Crown Amp
The XLI Series of power amplifiers from Crown® represents a new era in affordable, quality power amplification. All four models in the series are powerful, rugged and reliable. They are suited for musicians, DJs, and entertainers as well as houses of worship, discos, and pubs.
Features include RCA and XLR inputs, user selectable input sensitivity of 0.755V or 1.4V, Speakon® and binding post outputs, stereo/parallel/bridge-mono mode, power/fault/signal presence/clip indicators, forced-air cooling; and protection against shorts, no-load, on/off thumps and radio-frequency interference.
Key features of the Crown Professional powered amp
- Stereo/parallel/bridge-mono mode
- User selectable input sensitivity - 0.775V and 1.4V
- Efficient forced-air cooling prevents excessive thermal buildup
- Electronically balanced RCA & XLR inputs; binding post and Speakon outputs
- Two level controls, power switch, power LED, and six LEDs which indicate signal presence, clip and fault for each channel
Features and benefits
In-built protection
Protection against shorts, no-load, on/off thumps and radio-frequency interference.
Multiple Control Options
Two level controls, power switch, power LED, and six LEDs which indicate signal presence, clip and fault for each channel.
Specifications
- Frequency Response: 20 Hz - 20 kHz, +0/-1 dB (at 1 watt)
- THD:
- Intermodulation Distortion: =/
- Slew Rate: >10V/us
- Voltage Gain: 36 dB
- Damping Factor: (8 ohms, 10 Hz to 400 Hz) >200
- Signal To Noise Ratio (A-weighted): >100 dB
- Crosstalk (below rated power) 20 Hz to 1 kHz: -75 dB, -59 dB
- Input Sensitivity:: (for full rated power at 8 ohms) 0.775V or 1.4V
- Input Impedance (nominal balanced, unbalanced) 20kΩ, 10kΩ
- AC Line Voltage and Frequency Configurations Available: (+10%) 120V~60 Hz; 220V~50/60 Hz; 230-240V~50/60 Hz
- Dimensions: 19" x 3.5" x 14.4" (48.3cm x 8.9cm x 36.6cm)
- Weight: 43lbs (19.5kg)
- IEC Power Connector: 15A