Polyvine Varnish & Paint Remover
In Stock
£24.60 inc VAT
Free Saver Delivery on orders over the value of £45
Ultra-Low in VOC and Solvent Varnish & Paint Remover
Household-friendly and ultra-low in VOC and solvent, Polyvine's Varnish and Paint Remover is ideal for professional and amateur decorators alike for use on a wide range of surfaces.
Polyvine’s Varnish and Paint Remover is in demand from professional and amateur decorators alike – not just because it works so well, but also because it’s ultra-low in VOC and solvent.
This is the perfect household-friendly Varnish and Paint Remover, that’s been designed to be used on a range of surfaces including floors, doors, walls, furniture and more. It’s capable of removing multiple layers of product, this ultra-low VOC and ultra-low solvent product is safe and effective to use.
Key features of the Polyvine Paint Remover
- Non-toxic
- Household safe
- No ventilation required
- Removes multiple coats
- No fumes
- Ultra-low VOCs
- Ultra-low solvents
Features and Benefits of the Polyvine Varnish and Paint Remover
Ultra-Low in VOCs and Solvents
Perfect for household use: non-toxic, no fumes, no ventilation required.
Multi-Surface Use
Works on a wide range of surfaces: your one solution for paint and varnish removal.
Water Wash Up
Easily removed with water for speed and convenience.
Specifications of the Polyvine Varnish Remover
Preperation
Shake well before use to allow for the product to flow
Application
- Apply liberally with a brush
- The product will need to be left on the surface between 30 to 45 minutes before removing
- Remove after required time with a scraper or a stainless steel scouring ball
- Do not use wire wool as this will cause rust to penetrate into wooden surfaces
- If required, apply a further coats and repeat
- If the coating is extremely stubborn, apply liberally, cover with a plastic film (to avoid evaporation) and leave overnight
- Scrape a small test area to see if finish is ready for removal
- Once the surface has completely dried out, wash off any residue with a damp cloth or water
- Use sandpaper to remove any small traces of finish
Storage
- Protect from extremes of temperature during storage and application
- Do not allow to freeze
Coverage
1 litre will cover up to 4-6 square metres depending on thickness