Polyvine Classic Colour Acrylic Scumble 1L

At a glance

• Drying time: Base coat - minimum 24 hours. Top coat - minimum 48 hours
• Coverage: 10-20 square metres per litre when mixed with emulsion

Application and advice

Application

Select base coat colour in vinyl silk emulsion/satin latex. Apply base coat and allow to dry for a minimum of 24 hours with ventilation. Colour your Classic Colour with satin or matt emulsion. In warm conditions, above 21°c/70°f or in low humidity mix 6 parts Classic Colour to 1 part emulsion. In cold conditions, below 21°c/70°f or in high humidity mix 4 parts to 1 part emulsion. Brush or roller the coloured glaze liberally over the base coat. Create the desired decorative effect by breaking the surface with a crumpled rag, bag, sponge or a Polyvine tool or brush.

Caution

Always test adhesion and the application of the effect on a trial area before starting.

Storage

Protect from extremes of temperature during storage and application.

Health, safety and the environment

Non-hazardous. Ensure good ventilation. Keep out of reach of children. Contact with eyes - wash immediately with warm water. Remove excess from tools and mixing vessels before washing in warm soapy water. Do not empty into drains or watercourses.