Polyvine Cascatact Contact Adhesive

Polyvine Cascatact Contact Adhesive

Lead time: 5 days
£6.88 inc VAT

Free Saver Delivery on orders over the value of £45

Customer Rating: 
Average: 3 (2 votes)

  • Description

A solvent free, water based, spreadable adhesive that makes high strength, water resistant permanent bonds. Dries clear, without the fire and fume risks associated with traditional solvent based adhesives.

Ideal for

  • Textiles
  • Rubber
  • Plastic laminate
  • Wood
  • Plywood
  • Chipboard
  • Painted surfaces
  • Plaster
  • Metals
  • Cork
  • Leather
  • Canvas
  • Expanded polystyrene

 

Unique qualities

  • Drying time: tack time: 10 minutes open time: up to 4 hours
  • Recoat time: N/A
  • Curing time: 24 hours
  • Coverage: approx. 10 square metres per litre

Preparation

Surfaces to be bonded must be clean, dry and free from grease and oil. Smooth or polished surfaces should first be roughened with fine abrasive. Rubber and similar material must be abraded well and then the bonding area vigorously wiped with a spirit based cleaner. A priming coat will be necessary on absorbent surfaces.

Application

Apply a smooth thin layer of adhesive to both surfaces by brush, roller, pad or spray. Allow to dry 10-15 minutes. The white adhesive becomes clear when ready to bond. Bring the two surfaces into contact within 4 hours of application. Apply as much pressure as possible over the entire bond area. Clean spreaders in water. Remove surplus with a damp cloth whilst wet.

Storage

Protect from extremes of temperature during storage and application.

Health, safety and the environment

Non-hazardous, non-flammable. Contact with eyes or skin - wash immediately with water. Do not empty into drains or watercourses.