Rosco Flamex PC (Paper) 3.79L

Backorder: Available in 5 days (02/04/2024) if ordered today
£86.80 inc VAT
Add On Products

Free Saver Delivery on this item!

Rosco Flamex PC is an easy to use solution that will provide adequate flame retardence to paper products in an easy to use way.

Desgined for paper, Flamex does not require further mixing or dilution, and is best used in multiple light treatments to minimise discolouration and wrinkling through drying.

Roscoflamex PC is a new formulation designed to fireproof paper props and scenery without a wax coating. Do not intermix old and new Flamex products.

Use to treat:

  • Letters
  • Copier paper
  • Newspapers and magazines
  • Paper trash and packaging
  • Cardboard boxes
  • Matte board

Key Features of Rosco Flamex PC (Paper) 3.79L

  • Coverage: One gallon of Roscoflamex PC will treat approximately 400 square feet (37 square meters) of paper.

Specifications

The method of application and the amount of Roscoflamex PC required for sufficient treatment varies with the fabrics in use.

  • Dipping: This is the most efficient method of impregnation. Immerse completely for ten minutes, and hang to dry.
  • Brushing: Using a wide lay-in brush, brush the Flamex solution into the fibers of the material being treated. Brush in the solution using a criss-crossing pattern to insure adequate absorption.
  • Spraying: In a spray application, it is very important that an adequate amount of the Flamex be absorbed. In calculating the amount of solution needed, remember that a substantial portion of the spray will not fall on the fabric. Use a Hudson-type sprayer with a medium nozzle setting. For best results, hang the material to be treated and spray in a back and forth pattern starting at the bottom and working your way up to the top of the fabric sample. Over saturating the fabric may cause it to stiffen or otherwise alter its hand. ALWAYS treat a test sample to determine how the fabric will react and to test for effective flame retardance.


Storage

Store Flamex products in non-metallic containers. When metal sprayers are used, they should be thoroughly cleaned immediately after use, including nozzles and accessories. Avoid use of metal buckets or paint containers when possible.

Disclaimer

Read carefully the instructions supplied with any Flamex product. Rosco offers these products in good faith, but without guarantee of any type, since materials treated and methods of application are beyond the control of the manufacturer. You should determine suitability of the Flamex product for the intended use and always test before using.

Related Products

Stage Depot - Essentials, Flame Retardants and Wood Suppliers